Whether you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary modification, and in this content, we will see how to adjust the low beam lights of your Toyota Land Cruiser Serie 120? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Land Cruiser Serie 120.
Why set the low beam lights of your Toyota Land Cruiser Serie 120?
So let’s commence our content with the advantage of adjusting the low beam lights of your Toyota Land Cruiser Serie 120. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and checking this setting, either because the low beams of your Toyota Land Cruiser Serie 120 are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Toyota Land Cruiser Serie 120 for security is a good idea.
First of all, the adjusting of the dipped headlights of an Toyota Land Cruiser Serie 120 must be done for a elementary security purpose. Regardless it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Land Cruiser Serie 120 for legal reasons
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Land Cruiser Serie 120?
We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Toyota Land Cruiser Serie 120? This setting may seem a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Toyota Land Cruiser Serie 120
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Land Cruiser Serie 120
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Land Cruiser Serie 120 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Toyota Land Cruiser Serie 120 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 120, please go through our content on this subject.
If you have any additional questions about the Toyota Land Cruiser Serie 120, do not hesitate to consult our Toyota Land Cruiser Serie 120 category.
