Whether you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic modification, and in this article content, we will see how to adjust the low beam lights of your Toyota Hilux 4? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Hilux 4.
Why set the low beam lights of your Toyota Hilux 4?
So let’s start our article content with the benefit of adjusting the low beam lights of your Toyota Hilux 4. For many people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking this setting, either because the low beams of your Toyota Hilux 4 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Toyota Hilux 4 for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Toyota Hilux 4 must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Hilux 4 for legal reasons
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Hilux 4?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Toyota Hilux 4? This setting may sound a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Hilux 4
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Hilux 4
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Hilux 4 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Toyota Hilux 4 is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota Hilux 4, please read our article content on this subject.
To find more tips on the Toyota Hilux 4, take a look at the Toyota Hilux 4 category.
