Regardless you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may seem easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common modification, and in this article content, we will find out how to adjust the low beam lights of your Toyota Hilux 3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Hilux 3.
Why adjust the low beam lights of your Toyota Hilux 3?
So let’s start our article content with the advantage of adjusting the low beam lights of your Toyota Hilux 3. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Toyota Hilux 3 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Toyota Hilux 3 for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Toyota Hilux 3 must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Toyota Hilux 3 for law motives
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Hilux 3?
We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his Toyota Hilux 3? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Toyota Hilux 3
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Hilux 3
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Hilux 3 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Toyota Hilux 3 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota Hilux 3, please browse our article content on this subject.
To get more tips on the Toyota Hilux 3, take a look at the Toyota Hilux 3 category.
