It doesn’t matter if you feel you can’t see as well at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your car to blame – your low beams. Despite the fact this correction may seem easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complex than this common modification, and in this content page, we will discover how to adjust the low beam lights of your Toyota Highlander? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Highlander.

set-low-beam-headlights-toyota-highlander

Why adjust the low beam lights of your Toyota Highlander?

So let’s commence our content page with the point of adjusting the low beam lights of your Toyota Highlander. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Toyota Highlander are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .

Adjusting the low beam of your Toyota Highlander for security is a good option.

First of all, the adjusting of the dipped headlights of an Toyota Highlander must be done for a basic security cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Toyota Highlander for legal motives

Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Toyota Highlander?

We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his Toyota Highlander? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much issue.

Preparations to set the low beam of a Toyota Highlander

Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Toyota Highlander

Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Highlander (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, verify that the low beam setting of your Toyota Highlander is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Toyota Highlander, please read our content page on this subject.

If you want more guides on the Toyota Highlander, go to our Toyota Highlander category.