Regardless whether you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this basic modification, and in this content, we will discover how to adjust the low beam lights of your Toyota FJ Cruiser? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota FJ Cruiser.
Why set the low beam lights of your Toyota FJ Cruiser?
So let’s commence our content with the advantage of adjusting the low beam lights of your Toyota FJ Cruiser. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Toyota FJ Cruiser are not lighting up well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Toyota FJ Cruiser for safety is a wise decision.
Firstly, the adjusting of the dipped headlights of an Toyota FJ Cruiser must be done for a basic safety cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota FJ Cruiser for law reasons
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota FJ Cruiser?
We will now move on to the part that interests you the more in this content, how to adjust the low beams of his Toyota FJ Cruiser? This setting may seem to be a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota FJ Cruiser
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota FJ Cruiser
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Toyota FJ Cruiser (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Toyota FJ Cruiser is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota FJ Cruiser, please examine our content on this subject.
In the event that you have any further questions about the Toyota FJ Cruiser, do not hesitate to consult our Toyota FJ Cruiser category.
