It doesn’t matter if you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this basic realignment, and in this article content, we will see how to adjust the low beam lights of your Toyota Camry? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Camry.
Why set the low beam lights of your Toyota Camry?
So let’s begin our article content with the point of adjusting the low beam lights of your Toyota Camry. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your Toyota Camry are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Toyota Camry for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Toyota Camry must be done for a basic security cause. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Camry for law justifications
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Camry?
We will now move on to the section that concerns you the most in this article content, how to adjust the low beams of his Toyota Camry? This setting may seem to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Camry
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Camry
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Camry (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Toyota Camry is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota Camry, please read our article content on this subject.
If you need more tutorials on the Toyota Camry, go to our Toyota Camry category.
