It doesn’t matter if you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary realignment, and in this document, we will discover how to adjust the low beam lights of your Toyota Aygo? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Aygo.
Why set the low beam lights of your Toyota Aygo?
So let’s begin our document with the advantage of adjusting the low beam lights of your Toyota Aygo. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Toyota Aygo are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Toyota Aygo for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Toyota Aygo must be done for a ordinary safety purpose. Regardless whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Toyota Aygo for law motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Aygo?
We will now go forward to the section that interests you the more in this document, how to adjust the low beams of his Toyota Aygo? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Toyota Aygo
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Aygo
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Aygo (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Toyota Aygo is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Toyota Aygo, please examine our document on this subject.
If you want more tutorials on the Toyota Aygo, go to our Toyota Aygo category.
