Regardless you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary realignment, and in this article content, we will see how to adjust the low beam lights of your Toyota Avalon? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Avalon.

set-low-beam-headlights-toyota-avalon

Why adjust the low beam lights of your Toyota Avalon?

So let’s start our article content with the advantage of adjusting the low beam lights of your Toyota Avalon. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and verifying this setting, either because the low beams of your Toyota Avalon are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good option .

Adjusting the low beam of your Toyota Avalon for safety is a good option.

To begin, the adjusting of the dipped headlights of an Toyota Avalon must be done for a simple safety cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Toyota Avalon for legal justifications

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Toyota Avalon?

We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Toyota Avalon? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Toyota Avalon

To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Toyota Avalon

Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Avalon (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Toyota Avalon is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Toyota Avalon, please browse our article content on this subject.

In the event that you have any additional questions about the Toyota Avalon, do not hesitate to consult our Toyota Avalon category.