Regardless you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may appear easy thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common modification, and in this article content, we will see how to adjust the low beam lights of your Toyota 86? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota 86.
Why adjust the low beam lights of your Toyota 86?
So let’s start our article content with the point of adjusting the low beam lights of your Toyota 86. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and examining this setting, either because the low beams of your Toyota 86 are not illuminating well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Toyota 86 for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Toyota 86 must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota 86 for law reasons
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota 86?
We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Toyota 86? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota 86
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota 86
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota 86 (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Toyota 86 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Toyota 86, please read our article content on this subject.
If you need more tutorials on the Toyota 86, go to our Toyota 86 category.
