Regardless whether you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may seem easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary manipulation, and in this content page, we will discover how to adjust the low beam lights of your Tesla Model X? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Tesla Model X.


Why set the low beam lights of your Tesla Model X?

So let’s start our content page with the point of adjusting the low beam lights of your Tesla Model X. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Tesla Model X are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Tesla Model X for safety is a wise decision.

Firstly, the adjusting of the dipped headlights of an Tesla Model X must be done for a elementary safety purpose. Regardless it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Tesla Model X for law justifications

Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Tesla Model X?

We will now move on to the part that interests you the more in this content page, how to adjust the low beams of his Tesla Model X? This setting may appear a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Tesla Model X

Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Tesla Model X

Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Tesla Model X (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your Tesla Model X is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Tesla Model X, please browse our content page on this subject.

Whenever you have any further questions about the Tesla Model X, do not hesitate to consult our Tesla Model X category.