Regardless you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple modification, and in this article content, we will see how to adjust the low beam lights of your Tesla Model 3? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Tesla Model 3.

set-low-beam-headlights-tesla-model-3

Why adjust the low beam lights of your Tesla Model 3?

So let’s start our article content with the interest of adjusting the low beam lights of your Tesla Model 3. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Tesla Model 3 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .

Adjusting the low beam of your Tesla Model 3 for safety is a good option.

Firstly, the adjusting of the dipped headlights of an Tesla Model 3 must be done for a basic safety reason. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Tesla Model 3 for law motives

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Tesla Model 3?

We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Tesla Model 3? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.

Preparations to set the low beam of a Tesla Model 3

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure rigorously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Tesla Model 3

Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Tesla Model 3 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, examine that the low beam setting of your Tesla Model 3 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Tesla Model 3, please go through our article content on this subject.

If you need more guides on the Tesla Model 3, go to our Tesla Model 3 category.