Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic manipulation, and in this article content, we will discover how to adjust the low beam lights of your Suzuki Across? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Suzuki Across.
Why adjust the low beam lights of your Suzuki Across?
So let’s commence our article content with the point of adjusting the low beam lights of your Suzuki Across. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and checking this setting, either because the low beams of your Suzuki Across are not illuminating well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Suzuki Across for safety is a good option.
To start, the adjusting of the dipped headlights of an Suzuki Across must be done for a elementary safety cause. Whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Suzuki Across for legal justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Suzuki Across?
We will now move on to the section that concerns you the more in this article content, how to adjust the low beams of his Suzuki Across? This setting may seem to be a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Suzuki Across
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Suzuki Across
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Suzuki Across (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Suzuki Across is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Suzuki Across, please go through our article content on this subject.
Whenever you have any further questions about the Suzuki Across, do not hesitate to consult our Suzuki Across category.
