Regardless you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common manipulation, and in this content, we will find out how to adjust the low beam lights of your Subaru Legacy? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Subaru Legacy.

set-low-beam-headlights-subaru-legacy

Why adjust the low beam lights of your Subaru Legacy?

So let’s start our content with the point of adjusting the low beam lights of your Subaru Legacy. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Subaru Legacy are not illuminating well, or because you have the sense that they are too low or too powerful is a good option .

Adjusting the low beam of your Subaru Legacy for security is a good option.

To begin, the adjusting of the dipped headlights of an Subaru Legacy must be done for a basic security purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Subaru Legacy for law justifications

Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Subaru Legacy?

We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Subaru Legacy? This setting may appear to be a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.

Preparations to set the low beam of a Subaru Legacy

To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Subaru Legacy

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Subaru Legacy (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, examine that the low beam setting of your Subaru Legacy is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Subaru Legacy, please read our content on this subject.

To discover more tips on the Subaru Legacy, take a look at the Subaru Legacy category.