It doesn’t matter if you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary manipulation, and in this content, we will find out how to adjust the low beam lights of your Subaru Forester? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Subaru Forester.
Why set the low beam lights of your Subaru Forester?
So let’s begin our content with the interest of adjusting the low beam lights of your Subaru Forester. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and verifying this setting, either because the low beams of your Subaru Forester are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Subaru Forester for safety is a good plan.
To begin, the adjusting of the dipped headlights of an Subaru Forester must be done for a elementary safety purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Subaru Forester for law justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Subaru Forester?
We will now move on to the section that interests you the more in this content, how to adjust the low beams of his Subaru Forester? This setting may appear to be a bit complex, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Subaru Forester
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Subaru Forester
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Subaru Forester (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Subaru Forester is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Subaru Forester, please examine our content on this subject.
If you wish more guides on the Subaru Forester, go to our Subaru Forester category.
