Whether you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary realignment, and in this article, we will find out how to adjust the low beam lights of your skoda yeti? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your skoda yeti.

set-low-beam-headlights-skoda-yeti

Why set the low beam lights of your skoda yeti?

So let’s commence our article with the point of adjusting the low beam lights of your skoda yeti. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your skoda yeti are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good idea .

Adjusting the low beam of your skoda yeti for security is a good idea.

Firstly, the adjusting of the dipped headlights of an skoda yeti must be done for a simple security reason. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an skoda yeti for legal motives

Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a skoda yeti?

We will now go forward to the part that concerns you the more in this article, how to adjust the low beams of his skoda yeti? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.

Preparations to set the low beam of a skoda yeti

Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his skoda yeti

Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your skoda yeti (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your skoda yeti is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your skoda yeti, please browse our article on this subject.

If you want more guides on the skoda yeti, go to our skoda yeti category.