It doesn’t matter if you feel you can’t see properly at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple modification, and in this content page, we will find out how to adjust the low beam lights of your Skoda Karoq? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Skoda Karoq.
Why adjust the low beam lights of your Skoda Karoq?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Skoda Karoq. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your Skoda Karoq are not lighting up well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Skoda Karoq for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Skoda Karoq must be done for a ordinary safety purpose. Regardless whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Skoda Karoq for legal reasons
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Skoda Karoq?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Skoda Karoq? This setting may seem a bit complicated, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Skoda Karoq
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Skoda Karoq
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Skoda Karoq (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Skoda Karoq is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Skoda Karoq, please browse our content page on this subject.
To get more tips on the Skoda Karoq, take a look at the Skoda Karoq category.
