It doesn’t matter if you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this simple realignment, and in this content, we will see how to adjust the low beam lights of your Skoda Kamiq? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Skoda Kamiq.
Why set the low beam lights of your Skoda Kamiq?
So let’s begin our content with the point of adjusting the low beam lights of your Skoda Kamiq. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and verifying this setting, either because the low beams of your Skoda Kamiq are not lighting up well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Skoda Kamiq for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Skoda Kamiq must be done for a elementary safety cause. Whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Skoda Kamiq for law motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Skoda Kamiq?
We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Skoda Kamiq? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Skoda Kamiq
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Skoda Kamiq
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Skoda Kamiq (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Skoda Kamiq is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Skoda Kamiq, please browse our content on this subject.
If you have any further questions about the Skoda Kamiq, do not hesitate to consult our Skoda Kamiq category.
