Regardless whether you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this correction may look easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this ordinary manipulation, and in this document, we will find out how to adjust the low beam lights of your skoda fabia? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your skoda fabia.

set-low-beam-headlights-skoda-fabia

Why set the low beam lights of your skoda fabia?

So let’s commence our document with the advantage of adjusting the low beam lights of your skoda fabia. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your skoda fabia are not illuminating well, or because you have the feeling that they are too low or too strong is a good option .

Adjusting the low beam of your skoda fabia for safety is a good option.

Firstly, the adjusting of the dipped headlights of an skoda fabia must be done for a simple safety purpose. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an skoda fabia for legal motives

Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a skoda fabia?

We will now move on to the part that interests you the most in this document, how to adjust the low beams of his skoda fabia? This setting may seem a bit complicated, but if you stick to the instructions you should be able to do it without too much issue.

Preparations to set the low beam of a skoda fabia

First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his skoda fabia

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your skoda fabia (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, verify that the low beam setting of your skoda fabia is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your skoda fabia, please browse our document on this subject.

To discover more tips on the skoda fabia, take a look at the skoda fabia category.