Whether you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic realignment, and in this content page, we will find out how to adjust the low beam lights of your Seat Tarraco? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Seat Tarraco.

set-low-beam-headlights-seat-tarraco

Why set the low beam lights of your Seat Tarraco?

So let’s start our content page with the benefit of adjusting the low beam lights of your Seat Tarraco. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and looking at this setting, either because the low beams of your Seat Tarraco are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .

Adjusting the low beam of your Seat Tarraco for security is a good idea.

Firstly, the adjusting of the dipped headlights of an Seat Tarraco must be done for a ordinary security cause. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Seat Tarraco for law motives

Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Seat Tarraco?

We will now go forward to the section that interests you the more in this content page, how to adjust the low beams of his Seat Tarraco? This setting may appear a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Seat Tarraco

Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Seat Tarraco

Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Seat Tarraco (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Seat Tarraco is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Seat Tarraco, please go through our content page on this subject.

If you have any further questions about the Seat Tarraco, do not hesitate to consult our Seat Tarraco category.