Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this common manipulation, and in this content page, we will see how to adjust the low beam lights of your seat leon? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your seat leon.
Why set the low beam lights of your seat leon?
So let’s commence our content page with the interest of adjusting the low beam lights of your seat leon. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your seat leon are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your seat leon for safety is a wise decision.
Firstly, the adjusting of the dipped headlights of an seat leon must be done for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an seat leon for law motives
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a seat leon?
We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his seat leon? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a seat leon
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his seat leon
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your seat leon (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your seat leon is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your seat leon, please examine our content page on this subject.
In the event that you have any further questions about the seat leon, do not hesitate to consult our seat leon category.
