Regardless you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary realignment, and in this content, we will discover how to adjust the low beam lights of your seat ibiza? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your seat ibiza.
Why set the low beam lights of your seat ibiza?
So let’s commence our content with the benefit of adjusting the low beam lights of your seat ibiza. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and looking at this setting, either because the low beams of your seat ibiza are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your seat ibiza for security is a good option.
First of all, the adjusting of the dipped headlights of an seat ibiza must be done for a ordinary security purpose. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an seat ibiza for law justifications
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a seat ibiza?
We will now go forward to the section that interests you the more in this content, how to adjust the low beams of his seat ibiza? This setting may seem a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a seat ibiza
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his seat ibiza
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your seat ibiza (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your seat ibiza is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your seat ibiza, please go through our content on this subject.
Whenever you have any further questions about the seat ibiza, do not hesitate to consult our seat ibiza category.
