Regardless you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary manipulation, and in this article content, we will find out how to adjust the low beam lights of your Seat Arona? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Seat Arona.
Why set the low beam lights of your Seat Arona?
So let’s begin our article content with the interest of adjusting the low beam lights of your Seat Arona. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Seat Arona are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Seat Arona for security is a good idea.
To begin, the adjusting of the dipped headlights of an Seat Arona must be done for a simple security purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Seat Arona for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Seat Arona?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Seat Arona? This setting may seem to be a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Seat Arona
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Seat Arona
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Seat Arona (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Seat Arona is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Seat Arona, please go through our article content on this subject.
If you want more guides on the Seat Arona, go to our Seat Arona category.
