Regardless you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this simple modification, and in this article, we will discover how to adjust the low beam lights of your Renault Vel Satis? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Vel Satis.
Why set the low beam lights of your Renault Vel Satis?
So let’s begin our article with the benefit of adjusting the low beam lights of your Renault Vel Satis. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Renault Vel Satis are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Renault Vel Satis for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Renault Vel Satis must be done for a elementary security cause. Whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Vel Satis for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Vel Satis?
We will now move on to the section that concerns you the most in this article, how to adjust the low beams of his Renault Vel Satis? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Vel Satis
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Vel Satis
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Renault Vel Satis (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Renault Vel Satis is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Renault Vel Satis, please browse our article on this subject.
To find more tips on the Renault Vel Satis, take a look at the Renault Vel Satis category.
