Whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this simple realignment, and in this content page, we will discover how to adjust the low beam lights of your Renault Megane? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Megane.
Why set the low beam lights of your Renault Megane?
So let’s begin our content page with the advantage of adjusting the low beam lights of your Renault Megane. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your Renault Megane are not lighting up well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Renault Megane for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Renault Megane must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Megane for legal motives
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Megane?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Renault Megane? This setting may seem to be a bit complex, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Renault Megane
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Megane
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Megane (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Renault Megane is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Megane, please read our content page on this subject.
To get more tips on the Renault Megane, take a look at the Renault Megane category.
