Whether you feel you can’t see good enough through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may look easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common realignment, and in this content, we will find out how to adjust the low beam lights of your Renault Megane 3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Megane 3.

set-low-beam-headlights-renault-megane-3

Why set the low beam lights of your Renault Megane 3?

So let’s start our content with the interest of adjusting the low beam lights of your Renault Megane 3. For most of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your Renault Megane 3 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .

Adjusting the low beam of your Renault Megane 3 for security is a good option.

To begin, the adjusting of the dipped headlights of an Renault Megane 3 must be done for a ordinary security purpose. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Renault Megane 3 for legal reasons

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Renault Megane 3?

We will now move on to the part that concerns you the more in this content, how to adjust the low beams of his Renault Megane 3? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Renault Megane 3

First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Renault Megane 3

Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Megane 3 (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Renault Megane 3 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Renault Megane 3, please read our content on this subject.

Whenever you have any further questions about the Renault Megane 3, do not hesitate to consult our Renault Megane 3 category.