Whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common manipulation, and in this article, we will see how to adjust the low beam lights of your Renault Megane 2? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Megane 2.

set-low-beam-headlights-renault-megane-2

Why adjust the low beam lights of your Renault Megane 2?

So let’s begin our article with the interest of adjusting the low beam lights of your Renault Megane 2. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your Renault Megane 2 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .

Adjusting the low beam of your Renault Megane 2 for security is a good option.

Firstly, the adjusting of the dipped headlights of an Renault Megane 2 must be done for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Renault Megane 2 for legal justifications

Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Renault Megane 2?

We will now move on to the part that concerns you the most in this article, how to adjust the low beams of his Renault Megane 2? This setting may appear a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Renault Megane 2

First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure rigorously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Renault Megane 2

Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Megane 2 (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, verify that the low beam setting of your Renault Megane 2 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Renault Megane 2, please browse our article on this subject.

To get more tips on the Renault Megane 2, take a look at the Renault Megane 2 category.