Whether you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple realignment, and in this article content, we will discover how to adjust the low beam lights of your Renault Maxity? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Maxity.
Why adjust the low beam lights of your Renault Maxity?
So let’s begin our article content with the interest of adjusting the low beam lights of your Renault Maxity. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Renault Maxity are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Renault Maxity for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Renault Maxity must be done for a elementary security cause. Whether it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Renault Maxity for law reasons
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Maxity?
We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Renault Maxity? This setting may appear a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Maxity
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Maxity
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Maxity (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Renault Maxity is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Renault Maxity, please examine our article content on this subject.
If you need more tutorials on the Renault Maxity, go to our Renault Maxity category.
