Regardless whether you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple manipulation, and in this content page, we will discover how to adjust the low beam lights of your Renault Master? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Master.

set-low-beam-headlights-renault-master

Why adjust the low beam lights of your Renault Master?

So let’s commence our content page with the benefit of adjusting the low beam lights of your Renault Master. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Renault Master are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Renault Master for security is a wise decision.

To start, the adjusting of the dipped headlights of an Renault Master must be done for a basic security reason. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Renault Master for law reasons

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Renault Master?

We will now go forward to the part that concerns you the more in this content page, how to adjust the low beams of his Renault Master? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Renault Master

Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Renault Master

Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Master (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, examine that the low beam setting of your Renault Master is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Renault Master, please read our content page on this subject.

To find more tips on the Renault Master, take a look at the Renault Master category.