Regardless whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary realignment, and in this content, we will see how to adjust the low beam lights of your Renault Master 3? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Master 3.

set-low-beam-headlights-renault-master-3

Why set the low beam lights of your Renault Master 3?

So let’s start our content with the benefit of adjusting the low beam lights of your Renault Master 3. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Renault Master 3 are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Renault Master 3 for safety is a wise decision.

To begin, the adjusting of the dipped headlights of an Renault Master 3 must be done for a simple safety cause. Regardless it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Renault Master 3 for legal justifications

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Renault Master 3?

We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Renault Master 3? This setting may appear a bit difficult, but if you follow the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Renault Master 3

To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure precisely.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Renault Master 3

Once your vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Master 3 (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Renault Master 3 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Renault Master 3, please browse our content on this subject.

If you wish more tutorials on the Renault Master 3, go to our Renault Master 3 category.