It doesn’t matter if you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary realignment, and in this content page, we will find out how to adjust the low beam lights of your Renault Laguna 3? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Laguna 3.

set-low-beam-headlights-renault-laguna-3

Why adjust the low beam lights of your Renault Laguna 3?

So let’s commence our content page with the point of adjusting the low beam lights of your Renault Laguna 3. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Renault Laguna 3 are not illuminating well, or because you have the feeling that they are too low or too powerful is a good idea .

Adjusting the low beam of your Renault Laguna 3 for safety is a good idea.

To begin, the adjusting of the dipped headlights of an Renault Laguna 3 must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Renault Laguna 3 for legal justifications

Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Renault Laguna 3?

We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Renault Laguna 3? This setting may appear a bit complicated, but if you follow the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Renault Laguna 3

Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure cautiously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Renault Laguna 3

Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Renault Laguna 3 (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once completed, verify that the low beam setting of your Renault Laguna 3 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Renault Laguna 3, please browse our content page on this subject.

Whenever you have any additional questions about the Renault Laguna 3, do not hesitate to consult our Renault Laguna 3 category.