Regardless you feel you can’t see properly at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic manipulation, and in this article, we will find out how to adjust the low beam lights of your Renault Kadjar? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Kadjar.
Why adjust the low beam lights of your Renault Kadjar?
So let’s start our article with the advantage of adjusting the low beam lights of your Renault Kadjar. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Renault Kadjar are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Renault Kadjar for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Renault Kadjar must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Renault Kadjar for legal reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Kadjar?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Renault Kadjar? This setting may appear a bit complex, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Kadjar
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Kadjar
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Kadjar (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Renault Kadjar is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Kadjar, please browse our article on this subject.
To discover more tips on the Renault Kadjar, take a look at the Renault Kadjar category.
