Whether you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Renault Grand Scenic 4? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Grand Scenic 4.
Why set the low beam lights of your Renault Grand Scenic 4?
So let’s begin our article content with the benefit of adjusting the low beam lights of your Renault Grand Scenic 4. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Renault Grand Scenic 4 are not illuminating well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Renault Grand Scenic 4 for security is a good idea.
To start, the adjusting of the dipped headlights of an Renault Grand Scenic 4 must be done for a elementary security reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Renault Grand Scenic 4 for law motives
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Grand Scenic 4?
We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Renault Grand Scenic 4? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Grand Scenic 4
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Grand Scenic 4
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Grand Scenic 4 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Renault Grand Scenic 4 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Renault Grand Scenic 4, please browse our article content on this subject.
If you want more tutorials on the Renault Grand Scenic 4, go to our Renault Grand Scenic 4 category.
