Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may appear simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common manipulation, and in this content page, we will find out how to adjust the low beam lights of your Renault Clio 2 Campus? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Clio 2 Campus.
Why adjust the low beam lights of your Renault Clio 2 Campus?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Renault Clio 2 Campus. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your Renault Clio 2 Campus are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Renault Clio 2 Campus for safety is a good option.
First of all, the adjusting of the dipped headlights of an Renault Clio 2 Campus must be done for a elementary safety purpose. Whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Clio 2 Campus for law reasons
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Clio 2 Campus?
We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his Renault Clio 2 Campus? This setting may appear to be a bit difficult, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Clio 2 Campus
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Clio 2 Campus
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Clio 2 Campus (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Renault Clio 2 Campus is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Clio 2 Campus, please browse our content page on this subject.
If you want more tutorials on the Renault Clio 2 Campus, go to our Renault Clio 2 Campus category.
