It doesn’t matter if you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this simple modification, and in this article content, we will discover how to adjust the low beam lights of your PORSCHE PANAMERA? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your PORSCHE PANAMERA.
Why set the low beam lights of your PORSCHE PANAMERA?
So let’s start our article content with the advantage of adjusting the low beam lights of your PORSCHE PANAMERA. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and checking this setting, either because the low beams of your PORSCHE PANAMERA are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your PORSCHE PANAMERA for security is a good plan.
To start, the adjusting of the dipped headlights of an PORSCHE PANAMERA must be done for a basic security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an PORSCHE PANAMERA for law motives
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a PORSCHE PANAMERA?
We will now move on to the part that interests you the more in this article content, how to adjust the low beams of his PORSCHE PANAMERA? This setting may seem a bit difficult, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a PORSCHE PANAMERA
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his PORSCHE PANAMERA
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your PORSCHE PANAMERA (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your PORSCHE PANAMERA is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your PORSCHE PANAMERA, please read our article content on this subject.
If you want more tutorials on the PORSCHE PANAMERA, go to our PORSCHE PANAMERA category.
