Regardless you feel you can’t see as well through the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your car to blame – your low beams. Although this correction may appear easy thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Porsche Macan? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Porsche Macan.
Why adjust the low beam lights of your Porsche Macan?
So let’s start our article content with the benefit of adjusting the low beam lights of your Porsche Macan. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your Porsche Macan are not lighting up well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Porsche Macan for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Porsche Macan must be done for a ordinary safety purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Porsche Macan for law reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Porsche Macan?
We will now move on to the part that concerns you the more in this article content, how to adjust the low beams of his Porsche Macan? This setting may appear to be a bit complicated, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Porsche Macan
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Porsche Macan
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Porsche Macan (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Porsche Macan is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Porsche Macan, please go through our article content on this subject.
Whenever you have any further questions about the Porsche Macan, do not hesitate to consult our Porsche Macan category.
