Regardless whether you feel you can’t see good enough at nighttime, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this basic manipulation, and in this content, we will discover how to adjust the low beam lights of your Porsche Cayenne? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Porsche Cayenne.

set-low-beam-headlights-porsche-cayenne

Why adjust the low beam lights of your Porsche Cayenne?

So let’s begin our content with the interest of adjusting the low beam lights of your Porsche Cayenne. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Porsche Cayenne are not lighting up well, or because you have the sense that they are too weak or too strong is a good plan .

Adjusting the low beam of your Porsche Cayenne for safety is a good plan.

To start, the adjusting of the dipped headlights of an Porsche Cayenne must be done for a basic safety reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore important for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Porsche Cayenne for legal motives

In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Porsche Cayenne?

We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Porsche Cayenne? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Porsche Cayenne

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Porsche Cayenne

Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Porsche Cayenne (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, examine that the low beam setting of your Porsche Cayenne is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Porsche Cayenne, please examine our content on this subject.

If you wish more tutorials on the Porsche Cayenne, go to our Porsche Cayenne category.