Regardless you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary manipulation, and in this article content, we will see how to adjust the low beam lights of your Porsche 911? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Porsche 911.

set-low-beam-headlights-porsche-911

Why adjust the low beam lights of your Porsche 911?

So let’s commence our article content with the point of adjusting the low beam lights of your Porsche 911. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your Porsche 911 are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Porsche 911 for safety is a wise decision.

Firstly, the adjusting of the dipped headlights of an Porsche 911 must be done for a simple safety purpose. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Porsche 911 for legal motives

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Porsche 911?

We will now go forward to the section that concerns you the more in this article content, how to adjust the low beams of his Porsche 911? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Porsche 911

Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Porsche 911

Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Porsche 911 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, examine that the low beam setting of your Porsche 911 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Porsche 911, please go through our article content on this subject.

If you have any additional questions about the Porsche 911, do not hesitate to consult our Porsche 911 category.