It doesn’t matter if you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple realignment, and in this article content, we will find out how to adjust the low beam lights of your PORSCHE 718? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your PORSCHE 718.

set-low-beam-headlights-porsche-718

Why adjust the low beam lights of your PORSCHE 718?

So let’s start our article content with the interest of adjusting the low beam lights of your PORSCHE 718. For most people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and verifying this setting, either because the low beams of your PORSCHE 718 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .

Adjusting the low beam of your PORSCHE 718 for safety is a wise decision.

To begin, the adjusting of the dipped headlights of an PORSCHE 718 must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an PORSCHE 718 for law motives

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a PORSCHE 718?

We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his PORSCHE 718? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much problem.

Preparations to set the low beam of a PORSCHE 718

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his PORSCHE 718

Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your PORSCHE 718 (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your PORSCHE 718 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your PORSCHE 718, please browse our article content on this subject.

In the event that you have any additional questions about the PORSCHE 718, do not hesitate to consult our PORSCHE 718 category.