Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Although this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple manipulation, and in this article, we will see how to adjust the low beam lights of your Peugeot Boxer 2? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Boxer 2.

set-low-beam-headlights-peugeot-boxer-2

Why adjust the low beam lights of your Peugeot Boxer 2?

So let’s commence our article with the interest of adjusting the low beam lights of your Peugeot Boxer 2. For most of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Peugeot Boxer 2 are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .

Adjusting the low beam of your Peugeot Boxer 2 for security is a good plan.

To start, the adjusting of the dipped headlights of an Peugeot Boxer 2 must be done for a basic security reason. Regardless it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Peugeot Boxer 2 for legal justifications

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Peugeot Boxer 2?

We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Peugeot Boxer 2? This setting may appear a bit complex, but if you stick to the instructions you should be able to do it without too much problem.

Preparations to set the low beam of a Peugeot Boxer 2

Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure cautiously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Peugeot Boxer 2

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot Boxer 2 (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Peugeot Boxer 2 is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Peugeot Boxer 2, please browse our article on this subject.

To discover more tips on the Peugeot Boxer 2, take a look at the Peugeot Boxer 2 category.