Whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Although this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Peugeot 806? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 806.
Why adjust the low beam lights of your Peugeot 806?
So let’s start our article content with the point of adjusting the low beam lights of your Peugeot 806. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and checking out this setting, either because the low beams of your Peugeot 806 are not lighting up well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Peugeot 806 for safety is a good option.
First of all, the adjusting of the dipped headlights of an Peugeot 806 must be done for a basic safety cause. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 806 for law motives
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 806?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Peugeot 806? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 806
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 806
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Peugeot 806 (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Peugeot 806 is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 806, please read our article content on this subject.
If you want more tutorials on the Peugeot 806, go to our Peugeot 806 category.
