Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary modification, and in this article content, we will find out how to adjust the low beam lights of your Peugeot 4007? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 4007.
Why set the low beam lights of your Peugeot 4007?
So let’s start our article content with the benefit of adjusting the low beam lights of your Peugeot 4007. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and verifying this setting, either because the low beams of your Peugeot 4007 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Peugeot 4007 for safety is a good option.
To begin, the adjusting of the dipped headlights of an Peugeot 4007 must be done for a elementary safety cause. Regardless whether it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 4007 for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 4007?
We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Peugeot 4007? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 4007
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 4007
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Peugeot 4007 (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Peugeot 4007 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 4007, please go through our article content on this subject.
In the event that you have any further questions about the Peugeot 4007, do not hesitate to consult our Peugeot 4007 category.
