It doesn’t matter if you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your car to blame – your low beams. Despite the fact this correction may look easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common realignment, and in this content page, we will discover how to adjust the low beam lights of your Peugeot 308? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 308.
Why adjust the low beam lights of your Peugeot 308?
So let’s begin our content page with the point of adjusting the low beam lights of your Peugeot 308. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Peugeot 308 are not lighting up well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Peugeot 308 for security is a good idea.
To start, the adjusting of the dipped headlights of an Peugeot 308 must be done for a ordinary security reason. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 308 for legal justifications
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 308?
We will now move on to the section that concerns you the more in this content page, how to adjust the low beams of his Peugeot 308? This setting may sound a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot 308
First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 308
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 308 (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Peugeot 308 is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot 308, please examine our content page on this subject.
If perhaps you have any additional questions about the Peugeot 308, do not hesitate to consult our Peugeot 308 category.
