Regardless you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this basic realignment, and in this content page, we will see how to adjust the low beam lights of your Peugeot 306? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 306.
Why adjust the low beam lights of your Peugeot 306?
So let’s begin our content page with the point of adjusting the low beam lights of your Peugeot 306. For many people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and checking out this setting, either because the low beams of your Peugeot 306 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Peugeot 306 for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Peugeot 306 must be done for a elementary security reason. Regardless whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 306 for law justifications
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 306?
We will now go forward to the part that concerns you the most in this content page, how to adjust the low beams of his Peugeot 306? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 306
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 306
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot 306 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Peugeot 306 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot 306, please examine our content page on this subject.
If you want more tutorials on the Peugeot 306, go to our Peugeot 306 category.
