It doesn’t matter if you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common modification, and in this content, we will see how to adjust the low beam lights of your Peugeot 3008? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 3008.
Why set the low beam lights of your Peugeot 3008?
So let’s begin our content with the benefit of adjusting the low beam lights of your Peugeot 3008. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Peugeot 3008 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Peugeot 3008 for security is a good option.
To begin, the adjusting of the dipped headlights of an Peugeot 3008 must be done for a elementary security reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 3008 for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 3008?
We will now move on to the section that concerns you the more in this content, how to adjust the low beams of his Peugeot 3008? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot 3008
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 3008
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 3008 (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Peugeot 3008 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 3008, please examine our content on this subject.
If you have any further questions about the Peugeot 3008, do not hesitate to consult our Peugeot 3008 category.
