It doesn’t matter if you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Although this correction may look simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this common modification, and in this content, we will discover how to adjust the low beam lights of your Peugeot 2008? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 2008.
Why set the low beam lights of your Peugeot 2008?
So let’s commence our content with the advantage of adjusting the low beam lights of your Peugeot 2008. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Peugeot 2008 are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Peugeot 2008 for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Peugeot 2008 must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 2008 for legal motives
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 2008?
We will now go forward to the part that concerns you the most in this content, how to adjust the low beams of his Peugeot 2008? This setting may seem to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot 2008
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 2008
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Peugeot 2008 (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Peugeot 2008 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Peugeot 2008, please read our content on this subject.
In the event that you have any further questions about the Peugeot 2008, do not hesitate to consult our Peugeot 2008 category.
