Regardless whether you feel you can’t see as well at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Although this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this basic manipulation, and in this article content, we will discover how to adjust the low beam lights of your Peugeot 107? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 107.
Why adjust the low beam lights of your Peugeot 107?
So let’s commence our article content with the interest of adjusting the low beam lights of your Peugeot 107. For most people these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and examining this setting, either because the low beams of your Peugeot 107 are not illuminating well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Peugeot 107 for security is a good option.
Firstly, the adjusting of the dipped headlights of an Peugeot 107 must be done for a elementary security purpose. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 107 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 107?
We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Peugeot 107? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot 107
First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 107
Once your car is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 107 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Peugeot 107 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 107, please examine our article content on this subject.
If you need more guides on the Peugeot 107, go to our Peugeot 107 category.
