It doesn’t matter if you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common modification, and in this content page, we will see how to adjust the low beam lights of your Peugeot 106? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 106.
Why set the low beam lights of your Peugeot 106?
So let’s commence our content page with the advantage of adjusting the low beam lights of your Peugeot 106. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and checking out this setting, either because the low beams of your Peugeot 106 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Peugeot 106 for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Peugeot 106 must be done for a basic safety reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 106 for legal reasons
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 106?
We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his Peugeot 106? This setting may appear to be a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot 106
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 106
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 106 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Peugeot 106 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 106, please go through our content page on this subject.
To discover more tips on the Peugeot 106, take a look at the Peugeot 106 category.
