Regardless you feel you can’t see as well at nighttime, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may appear easy thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this simple manipulation, and in this article content, we will find out how to adjust the low beam lights of your Opel Vivaro? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Opel Vivaro.

set-low-beam-headlights-opel-vivaro

Why set the low beam lights of your Opel Vivaro?

So let’s start our article content with the benefit of adjusting the low beam lights of your Opel Vivaro. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and verifying this setting, either because the low beams of your Opel Vivaro are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .

Adjusting the low beam of your Opel Vivaro for safety is a good option.

Firstly, the adjusting of the dipped headlights of an Opel Vivaro must be done for a ordinary safety reason. Regardless it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Opel Vivaro for law reasons

Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Opel Vivaro?

We will now move on to the section that concerns you the most in this article content, how to adjust the low beams of his Opel Vivaro? This setting may seem a bit complex, but if you follow the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Opel Vivaro

First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Opel Vivaro

Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Opel Vivaro (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once completed, check that the low beam setting of your Opel Vivaro is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Opel Vivaro, please go through our article content on this subject.

If perhaps you have any further questions about the Opel Vivaro, do not hesitate to consult our Opel Vivaro category.