Regardless you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may seem easy thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this simple modification, and in this article content, we will discover how to adjust the low beam lights of your Opel Meriva? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Opel Meriva.
Why set the low beam lights of your Opel Meriva?
So let’s begin our article content with the advantage of adjusting the low beam lights of your Opel Meriva. For many people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Opel Meriva are not lighting up well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Opel Meriva for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Opel Meriva must be done for a ordinary security purpose. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Opel Meriva for legal justifications
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Opel Meriva?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Opel Meriva? This setting may seem to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Opel Meriva
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Opel Meriva
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Opel Meriva (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Opel Meriva is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Opel Meriva, please examine our article content on this subject.
If perhaps you have any further questions about the Opel Meriva, do not hesitate to consult our Opel Meriva category.
