Regardless whether you feel you can’t see good enough after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may seem simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary realignment, and in this article, we will see how to adjust the low beam lights of your Nissan Sentra? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Sentra.


Why adjust the low beam lights of your Nissan Sentra?

So let’s start our article with the advantage of adjusting the low beam lights of your Nissan Sentra. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Nissan Sentra are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .

Adjusting the low beam of your Nissan Sentra for security is a good plan.

To start, the adjusting of the dipped headlights of an Nissan Sentra must be done for a basic security purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Nissan Sentra for legal motives

Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Nissan Sentra?

We will now move on to the section that concerns you the more in this article, how to adjust the low beams of his Nissan Sentra? This setting may appear a bit complex, but if you stick to the guidelines you should be able to do it without too much issue.

Preparations to set the low beam of a Nissan Sentra

Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Nissan Sentra

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Sentra (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your Nissan Sentra is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Nissan Sentra, please go through our article on this subject.

To find more tips on the Nissan Sentra, take a look at the Nissan Sentra category.